NOCK GmbH

Derinding machines

Sturdy, reliable, proven

CBV 436 COMBI-NOCK

CBV 436 COMBI-NOCK

Features and application range

  • cutting width: 430 mm
  • cutting speed: 16 / 32 m/min
  • combination machine for derinding and membrane skinning: automatic operation with conveyors derinding of big, round pieces in the open top (manual) membrane skinning (open top mode)
HINT: If there are bigger quantities of meat to be membrane skinned, we recommend the use of a „pure“ NOCK membrane skinner (i.e. NOCK Vliesex V460N), since combination machines will lead to a worse yield due to their more abrasive toothing of the transport roller.

Standard equipment

  • transport roller without circumferential grooves and spring suspended blade holder
  • two-speed motor
  • dynamic (counter-rotating) stainless steel cleaning roller and NOCK Air-Jet compressed air cleaning system keep the transport roller constantly clean during operation
  • infeed belt and spring suspended pressure roller for automatic derinding, removable within seconds without any tools
  • infeed table and foot switch bar for open top mode (quick remodelling)
  • discharge sheet
  • blade-holder with captive screws, blade gap continuously adjustable
  • NOCK POWER PLATES® for particular robustness and service-friendlyness
  • NOCK EASY-FLOW® safety cover
  • lockable castors
  • stainless steel
  • stainless steel bearings

Options

Technical data CBV 436 COMBI-NOCK
cutting width 430 mm
cutting speed 16 m/min for derinding
32 m/min for membrane skinning
maximum throughput height 90 mm
blade gap 0 - 4.5 mm for derinding
0 - 0.5 mm for membrane skinning

apply length on infeed conveyor

400 mm

infeed conveyor (external frame dimensions)

850 x 425 mm

overall measures W x H x L 800 x 1190 x 1210 mm
weight 220 kg
motor performance 0.55 / 0.75 kW
electrical connection

3 AC - 400 V - 50 Hz

IEC 60309 16 A 6h

other voltages upon request
compressed air 5 < p <10 bar
plug coupling DN 7.2 (G1/4 external)
compressed air requirement ca. 250 l/min (ambient pressure)
blade dimension 445 x 20 x 1 mm
Search
NOCK Maschinenbau GmbH
Industriestrasse 14
77948 Friesenheim / GERMANY
Tel.: +49 (0) 78 21 / 92 38 98-0
E-mail: info@nock-gmbh.com

© 2017 NOCK Maschinenbau GmbH

16.10.2019 - 02:18 Uhr
© 2017 NOCK Maschinenbau GmbH