Cortex CB 496

Cortex CB 460 Derinder

Automatic meat derinding machine with height adjustable pressure unit and special suitablity for open top processing

Features and application range

cutting width:

430 mm

cutting speed:

24 m/min


Derinding machine with medium length infeed conveyor for automatic processing and special suitability for „manual“ derinding with open top operation.

Low side walls for optimal working in open top operation.

  • automatic derinding of flat and high pieces as for example belly, back fat, rind cut to size, partial cuts, shoulders etc.
  • derinding of round parts, for example ham or shoulder, open top operation

Standard equipment

  • infeed conveyor
  • discharge slide sheet
  • blade gap infinitely adjustable
  • blade holder suspension spring loaded for perfect skinning results
  • spring suspended pressure roller, 3-stage variability in height
  • tooth roller with scraper comb
  • infeed conveyor and pressure roller for automatic derinding, can be removed without tools
  • exchangeable infeed table and foot switch bar to derind round pieces with open top (machine can be effortlessly converted)
  • safety cover on the machine infeed
  • access protection at the rear for improved safety during work
  • NOCK POWER PLATES® for particular robustness and service-friendliness
  • centring plate positions the stacking container (E1, E2), can be removed without tools
  • lockable castors
  • stainless steel
  • stainless steel bearings


  • NEW: discharge conveyor with safety cover for increased safety at work
  • plastic modular belts
  • inflated pressure balloon
  • Cleaning trolley for storage and cleaning of dismountable parts: conveyors, belts, pressure roller and blade holder

Technical data

Cortex CB 460

cutting width

430 mm

cutting speed

24 m/min

maximum throughput height

90 mm

blade gap

0 - 5 mm

apply length on infeed conveyor

300 mm

infeed conveyor (1)

850 x 425 mm

discharge conveyor (1)

850 x 360 mm

overall dimension W x H x D (without/with discharge conveyor)

800 x 2025 x 1250 / 1820 mm

weight (without/with discharge conveyor)

218 / 230 kg

motor performance

0.75 kW

electrical connection

3 L - PE - 400 V - 50 Hz
IEC 60309 16 A 6h (plug)
other voltages upon request

compressed air

not required

(1) external dimension of the conveyor frame

Any questions?

Privacy note

This website uses external components as i. e. Matomo and YouTube which can be used to collect data about your motion. Privacy information