Fish skinning machines

Cut down costs by first-class technology



Features and application range

  • cutting width: 430 mm
  • cutting speed:  17 m/min
  • conveyorized fish skinner with new, flexible NOCK MULTI DISC® upper pressure conveyor and special blade holder technology NOCK ACTIVE SKIN GRIPPER® ASG for particular gentle skinning of white fish, e.g. cod, pollack, haddock, wolffish, perch, halibut etc. Prevents the V-shaped splitting of the tail.
  • 2 methods of skinning:
    - pulling off the skin with a blunt blade (silver skinning)
    - skinning with sharp blade (stepless from thin to deep; with activated NOCK ACTIVE SKIN GRIPPER® ASG

skinned pollack
skinned pollack
skinned wolffish
skinned halibut
NOCK MULTI DISC® upper pressure conveyor
cover opened

Standard equipment

  • new, flexible NOCK MULTI-DISC® upper pressure belt with pneumatic release for particularly gentle and reliable skinning of white fish; without damage to the inner surface of the fillet
  • special blade holder technology NOCK ACTIVE SKIN GRIPPER® ASG when skinning with a sharp blade
  • transport roller (AISI 316L) without peripheral grooves, with dynamic cleaning roller made of stainless steel  (S technology)
  • integrated water cleaning unit for constant continuous operation with low water consumption
  • blade gap infinitely adjustable
  • spring suspended blade holder for perfect skinning results
  • infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
  • passage without skinning possible (conversion with few handles)
  • NOCK POWER PLATES® for a machine construction which is easy to clean, for outstanding robustness and service friendliness
  • NOCK EASY-FLOW® safety cover
  • lockable castors
  • stainless steel
  • stainless steel bearings


  • discharge conveyor for removed skin

Technical data Skinex SBW 496 WHITE FISH

cutting width

430 mm

cutting speed

17 m / min

maximum throughput height

70 mm

blade gap

0 - 3 mm infinitely adjustable

apply length on infeed conveyor

400 mm

infeed conveyor

850 x 425 mm

discharge conveyor

850 x 425 mm

overall dimension W x H x D

750 x 1220 x 1820 mm


260 kg

motor performance

1.1 kW

electrical connection

3 AC - 400 V - 50 Hz

IEC 60309 16 A 6h

other voltages upon request

compressed air

5 < p < 10 bar

connection DN 7.2 (G1/4 external)

compressed air requirement

ca. 50 l / min (ambient pressure)

water connection

G 1/2 internal thread

water consumption

approx. 200 l/h

NOCK Maschinenbau GmbH
Industriestrasse 14
77948 Friesenheim / GERMANY
Tel.: +49 (0) 78 21 / 92 38 98-0

© 2017 NOCK Maschinenbau GmbH

19.10.2019 - 11:23 Uhr
© 2017 NOCK Maschinenbau GmbH