NOCK GmbH

CF technology and S technology

The NOCK fish skinning machines are equipped either with the CF technology or with the S technology:

1. The CF technology

CF technology
The automatic NOCK CBF machine models and the open top NOCK CF fish skinning machines are equipped with a transport roller with grooves (tooth roller). A scraper comb cuts in the grooves of the tooth roller in order to keep it clean during operation.

An economical water cleaning unit supports this cleaning function effectively so that a good continuous operation is ensured. When skinning smoked fish, there is no need of using the water cleaning unit.

The CF technology is most suitable especially to skin fish with thick skin and offers advantages because of its universal application for many fish species.
It is also suitable for fish with thin skin, but with less yield when doing thin skinning with sharp blade or pulling-off the skin with blunt blade (silver skinning).

The CF transport rollers are available with coarse or fine toothing.

2. The S technology

S technology
The automatic NOCK SB machine models and the open top NOCK S fish skinning machines are equipped with a transport roller without grooves with fine toothing and a uniflow cleaning roller made of stainless steel.

Even with the S technology, an economical water cleaning unit supports this cleaning function effectively so that a good continuous operation is ensured. When skinning smoked fish, there is no need of using the water cleaning unit.

The S technology is most suitable especially for the skinning of fish with thin skin and achieves best yield when thin skinning with sharp blade and pulling-off the skin with blunt blade (silver skinning). There are limitations when deep skinning with open top machines as the transportation support of a pressure roller is missing. Depending on the kind of fish and the consistency of the fillets it is not always possible to take advantage of the maximum blade gap for deep skinning.

Also the S transport rollers are optionally available with coarse or fine toothing.
NOCK Maschinenbau GmbH
Industriestrasse 14
77948 Friesenheim / GERMANY
Tel.: +49 (0) 78 21 / 92 38 98-0
E-mail: info@nock-gmbh.com

© 2017 NOCK Maschinenbau GmbH

16.10.2019 - 02:02 Uhr
© 2017 NOCK Maschinenbau GmbH