Cortex CBF 496

Cortex CBF 496/7 Salmon TWIN Skinner

Automatic two lines fish skinner with CF technology and application for Salmon skinning

Features and application range

cutting width:

2 x 300 mm (double lane)

cutting speed:

29 m/min

features:

3 methods of skinning:

  • deep skinning with sharp blade
  • thin skinning (shallow skinning) with sharp blade
  • pulling-off the skin with blunt blade (silver skinning)
application:
    double lane skinning machine optimized for skinning fresh and smoked salmon

      Standard equipment

      • infeed conveyor
      • discharge conveyor
      • suitable for double lane feeding, therefore 2 separate blade holders, 2 tooth roller, 2 pressure units
      • tooth roller (AISI 316L) with grooves and scraper comb (CF technology)
      • NOCK ACTIVE SKIN GRIPPER® (ASG) for thin skinning with sharp blade, no remaining skin on the fish tail
      • blade gap independently and infinitely adjustable on the right and left side
      • pneumatically suspended blade holders for perfect skinning results
      • pressure units with counter weights, infinitely adjustable
      • special hard pressure roller for salmon, made of polyamide with very long lifetime and more pressure in the middle of the fillet (less pressure at the sides of the fillets = less loss when deep skinning)
      • water cleaning unit for steady continuous operation when processing fresh fillets
      • infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
      • NOCK POWER PLATES® for a machine construction which is easy to clean, for outstanding robustness and service friendliness
      • NOCK EASY-FLOW® safety cover in the machine infeed for reliable product flow and better hygiene during processing, with gas pressure spring for easy handling
      • Protective cover in the machine outlet for increased safety during operation
      • lockable castors
      • stainless steel
      • stainless steel bearings

      Options

      • discharge conveyor for removed skin
      • transfer plates on which fillets pass through without being skinned
      • Cleaning trolley for storage and cleaning of dismountable parts like: conveyors, belts, pressure roller and blade holder

      TIP: With the NOCK Cortex CBF 496/7 SALMON TWIN you achieve deeper skinning in the area of the dark side muscle due to the standard hard pressure roller for salmon. This effects more pressure in the middle of the fillet and therefore a deeper skinning. The sides of the fillets are skinned less deep.

      Technical data

      Cortex CBF 496/7 SALMON TWIN

      cutting width

      2 x 300 mm

      cutting speed

      29 m/min

      maximum throughput height

      70 mm

      blade gap

      0 - 5 mm (infinitely adjustable)

      NOCK ACTIVE SKIN GRIPPER® ASG

      standard

      apply length on infeed conveyor

      400 mm

      infeed conveyor (1)

      850 x 690 mm

      discharge conveyor (1)

      850 x 690 mm

      overall dimension W x H x D

      1200 x 1240 x 1860 mm

      weight

      400 kg

      motor performance

      0.75 kW

      electrical connection

      3 L - PE - 400 V - 50 Hz
      IEC 60309 16 A 6h (plug)
      other voltages upon request

      water connection

      G 1/4 internal thread

      water consumption

      approx. 300 l/h

      compressed air connection

      6 < p < 10 bar (dry)

      compressed air consumption

      approx. 30 l/min (ambient pressure)

      (1) external dimension of the conveyor frame

      Any questions?

      Privacy note

      This website uses external components as i. e. Matomo and YouTube which can be used to collect data about your motion. Privacy information