Fish skinning machines

Cut down costs by first-class technology

Skinex QS 888

Skinex QS 888

Features and application range

  • cutting width: 2 x 200 mm
  • conveyorized double lane fish skinning machine with  S technology and enormous capacity (more than 200 fillets/min, depending on the size of the fillets)
  • replacement model of the successful Skinex SB 495/T TWIN with even easier operation
  • perfect for skinning tilapia, pangasius (basa), catfish, redfish, cod and other fish species
  • silver skinning of salmon (single-lane)
  • 3 methods of skinning:
    - thin skinning (shallow skinning) with sharp blade
    - pulling-off the skin with blunt blade (silver skinning)
    - deep skinning with sharp blade (restricted)
  • perfect substitute of old BAADER 51, with additional advantage of more skinning methods
Divided pressure roller
Divided pressure roller
Transport roller without grooves, with counter rotating cleaning roller
Transport roller without grooves, with dynamic cleaning roller
lateral view
Lateral view

Standard equipment

  • divided pressure roller (spring suspended) for double lane feeding
  • transport roller (AISI 316L) without peripheral grooves, with dynamic cleaning roller made of stainless steel  (S technology)
  • water cleaning unit for steady continuous operation
  • blade gap infinitely adjustable
  • spring suspended blade holder for perfect skinning results
  • special pressure rollers made of polyamide for gentle processing, easy handling and long durability
  • infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
  • NEW: Trapeze-shaped casing with bigger wheel base for maximum stability when transporting the machine over uneven surfaces
  • NOCK POWER PLATES® for a machine construction which is easy to clean, for outstanding robustness and service friendliness
  • NOCK EASY-FLOW® safety cover
  • lockable castors
  • stainless steel
  • stainless steel bearings


  • discharge conveyor for removed skin
  • longer infeed conveyor
  • transport roller with coarse or fine toothing
Technical data Skinex QS 888

cutting width

2 x 200 mm

speed of infeed conveyor

29 m/min

maximum throughput height

40 mm

blade gap

0 - 2 mm infinitely adjustable

apply length on infeed conveyor

540 mm

infeed conveyor (1)

850 x 425 mm

discharge conveyor (1)

850 x 425 mm

discharge conveyor for removed skin (1)

650 x 425 mm

overall dimension W x H x D

810 x 1190 x 1820 mm


240 kg

motor performance

1.1 kW

electrical connections

3 AC - 400 V - 50 Hz

IEC 60309 16 A 6h

other voltages upon request

water connection

G 1/2 internal thread

water consumption

approx. 200 l/h

compressed air

not required

(1) external dimension of the conveyor frame

NOCK Maschinenbau GmbH
Industriestrasse 14
77948 Friesenheim / GERMANY
Tel.: +49 (0) 78 21 / 92 38 98-0

© 2017 NOCK Maschinenbau GmbH

19.10.2019 - 13:11 Uhr
© 2017 NOCK Maschinenbau GmbH