+49 7821 - 923898-0

Open top combination machine for derinding round products and for membrane skinning.

Features and application range

cutting width:	430 mm
cutting speed:	17 / 31 m/min
application:	combination machine as open top model with vast application possibilities: derinding of round products such as knuckle of porc, ham / back leg membrane skinning of porc, beef, venison, ostrich skinning of poultry
Safety notice:	According to EN 12355 flat pieces may only be derinded with an automatic conveyor belt machine
HINT:	If there are bigger quantities of meat to be membrane skinned, we recommend the use of a „pure“ NOCK membrane skinner (i.e. NOCK Vliesex V460N), since combination machines will lead to a worse yield due to their more abrasive toothing of the transport roller

Standard equipment

transport roller without circumferential grooves and spring-suspended blade holder
two-speed motor
a dynamic cleaning roller made of stainless steel and the NOCK Air-Jet compressed air cleaning sytem keep the transport roller constantly clean during operation
blade holder with captive screws
ergonomically favourable trapeze-shaped casing for maximum stability when transporting the machine over uneven surfaces
ergonomically favourable safety foot switch bar, adjustable in height
15 mm thick NOCK POWER PLATES® installed in the machine casing provide constant precision and service friendliness
safety switch for processing table
lockable castors
stainless steel

	Vliesex CV 460
cutting width	430 mm
cutting speed	17 m/min for derinding 31 m/min for membrane skinning
blade gap	0 - 4.5 mm
overall dimension W x H x D	750 x 970 x 700 mm
weight	150 kg
motor performance	0.55 / 0.88 kW
electrical connection	3 AC - 400 V - 50 Hz IEC 60309 16 A 6h other voltages upon request
compressed air connection	5 < p <10 bar plug coupling DN 7.2 (G1/4" external)
compressed air requirement	ca. 250 l/min (ambient pressure)